Wednesday, September 19, 2012

Inspiration

Lately I have become quite fascinated with feathers, I have had some interesting visitors to my bird feeder this summer. Recently, this tiny little Red Breasted Nuthatch has been popping by. It is only 3 - 4 inches and moves very swiftly so you need to be quick to snag a photo.



 This pretty little bird was the inspiration for the doodle below.


Yesterday, I was quite surprised to find this looking back at me just outside my window...... It appears to be a Broad Winged Hawk.......this beauty was roughly 20 inches long (maybe bigger)
I took this photo through the window......he was only about 3 feet away and I swear he was posing for me!






Wednesday, September 12, 2012

Tentest Design wall

Sometimes you need something more substantial than a flannel design wall. Those are great for block placement, but what if you want to add embellishments?.....you can not easily audition beads, buttons or found objects in an upright position.  
I thought you would like to see what I use. At the lumber store, I purchased a sheet of "Tentest", I bought a 4'x8' sheet and asked them to cut it down to a more manageable 4'x6' size

close up of the cut end
This product is a fibrous board, also great for use as a bulletin board. It is sturdy, fairly lightweight and pins into very easily. I took an inexpensive bed-sheet and essentially made a large pillowcase out of it to slip right over the whole piece....I can use both sides if I want to.

4'x6' covered Tentest
 You can pin just about anything to this, so now, you can quickly see how the addition of  various embellishments will look......walk away, step back and assess before making a commitment.







Tuesday, September 4, 2012

Sun-Print & Thread

Do you recall the sun-print I made using feathers? here is what they look like now, with just a small bit of stitching added. I tried to maintain a light airy feel.






Tuesday, August 28, 2012

Centerfold

That's right, I can add "centerfold" to my list of accomplishments.......no need to cover your eyes, its not me, just my design  :-)


The Autumn issue of the Canadian Quilter is out, and for this one, I submitted a design/pattern for those who would like to try a bit of thread painting. My design allows the maker to really take full advantage of beautiful print fabrics and then, to simply enhance them with thread.


Marsha, the Editor, has once again, done an outstanding job! Don't forget, there is also a spot on the CQA web site (members only section) where members can access the PDF version of the pattern to send straight to their printers as well as an area to upload photos of their finished projects. In addition, there is now a CQA blog...even more ways for Canadian quilters to connect

Tuesday, August 21, 2012

Lesson Learned

Last week I decided to try something I had read in the June/July issue of Quilting Arts magazine. It was an article on dyeing fabrics using ice cubes. Even though I do not have "Procion" dyes, I thought I'd give it a whirl with the dyes I did have, and see what I might end up with.
.
I soaked the fabric as instructed, layered fabric, ice cubes and dye powder (as instructed)

The article tells you to place this container inside another in case of overflow as the cubes melt....hmmmm, it is a "volume" thing, I was certain it wasn't going to overflow, but did as instructed and I am quite happy that I did because very soon after I placed my jar of fabric/cubes and dye into the second container I heard a loud CRACK!  that did not sound good at all but I did leave the whole works for 24 hours (as instructed)

well it did not overflow, but it did LEAK!.......This could have been an awful mess


here is the hole in bottom of the jar.......was it the warm fabric-ice cubes-glass combo?
Even though the dye ran out the bottom of the jar I still got some interesting pieces, I especially like the way the middle one turned out
Top layer
Middle layer
Bottom layer


 so.....lesson learned?  Sometimes it is good to follow the instructions   :-)


Tuesday, August 14, 2012

Sun Printing....the Basics

I have had a few questions about the sun printing process, so I thought I would give you a quick tutorial. You don't need a great deal of supplies for this. The correct paints, fabric that has been thoroughly washed to remove any chemicals, water and SUN. so here is all you need to know

These are the paints. They are Setacolor transparent paints made by Pebeo. This process does not work with other types of fabric paints.  OOOPS!!! apparently I am in error. I am told that other paints will in fact work for this process, Thanks Terry,  looks like I will be doing a little experimenting .....so, let me just say that in this case, Setacolor paints were used.
you will mix your paint with water...that's it....too easy.
Generally the ratio you want is 2 parts water to 1 part paint or for even more effect 1-1 (the more diluted the paint the less intense the print will be)
I always begin with my piece of fabric dampened to allow the paint mixture to flow easily across the surface. It also helps the colours mix and blend. I place my fabric down on a board or some Styrofoam that has been covered with plastic, keep in mind that any lines or scrunching of the plastic will transfer to your final image (sometimes you can get some really cool texture this way)
Now with a paint brush or foam brush, start spreading your colour across the damp fabric. I often use several colours and allow them to mix in some of the areas. Don't be shy, get it good and wet with the paint mixture. Place the items you are wanting to get an image of directly onto the wet paint. If they are very light weight, find a way to hold them down . Items that do not sit flat against the fabric will not produce a sharp clear image.
now take the whole works outside and place it in an area where the sun can do it's magic and leave it to dry
Drying time will vary depending on how wet you got your fabric and how strong the sun is. I always leave it as long as I can just to be certain it is very dry and to get the most dramatic effect. (note the difference between how the colours blend from the wet piece to the dried one below, as well as the texture created by the plastic underneath. I am never certain if heat setting is really necessary at this point (think the sun already did that for me) but I do it anyway.


the fun of the reveal

good colour blend, interesting texture, great images......and now...nicely painted feathers......more inspiration!





Monday, August 6, 2012

Sun-Printed project continued

I found the center of that Dogwood blossom to be very interesting, it is a fabulously textured sphere
So, I wanted to create something interesting at the center of my sun-printed blossoms, "flat" was simply not going to do! I began with a small bead which was placed  in a circle of wool that I gathered up tightly around it to form a sphere I could stitch on, then, one by one stitched small beads to the wool.

actual Dogwood center (far left) bead and wool (center)  finished beaded center (right)

I made a few different sizes to co-ordinate with the various sizes of blossoms, for the smallest ones I just stitched small, layered, clusters of beads

Tuesday, July 31, 2012

Sun-Printing

Sun-printing seems to be a technique used primarily to create interesting surface design, I am experimenting a little to create a small piece using a sun printed image as the main focus.
My inspiration was this Dogwood blossom

This is the fabric I began with, it is an off white batik with small amounts of very pastel colourings. (That band of colour you see at the bottom is actually the same fabric after the paint was applied)

Wanting more than one blossom, I had to make extra petals to use as resist (more about that process later) you can see that I also scattered on a wee bit of salt for a more interesting effect on the background.

Here is the print left by the sun.

Then, I began to apply colour to the stems, created some leaves, but added only fine lines of thread to the blossom petals.
I'll show how I plan to deal with the centers next time.


Monday, July 23, 2012

Pin Basting

A while back, I heard about a product that allows you to use straight pins for basting your quilts, seems so much easier than using safety pins, especially when it comes to removing them as you are quilting. As is often the case, I wanted to try the product but it isn't available locally. I could buy it online but did not want to invest the money, the added costs of exchange rate and shipping often make products less attractive, especially not knowing for sure if it is a tool you will definitely want to use regularly.
SO, I decided to conduct my own experiment with what I could find easily. In the children's craft aisle at the Dollar store I found a package of foam beads.
the foam is thick enough and dense enough to hold the pins in place.......you simply insert the pin into your quilt sandwich, slip a foam shape on the end (make sure the pin is well inserted but not protruding out the other side)
 For this test, I pin basted

  and then machine basted with wash away thread, removing the foam and pins as I went along

 This actually worked quite well, the layers stayed together, no shifting, and now I can easily maneuver this piece to do the intricate stitching I have planed. (once the stitching is complete I will use a paint brush and water to dissolve the wash away thread)
Would I try this on a full size bed quilt? No, not likely, but it certainly works great for smaller pieces ( the test subject is roughly 30"square) it did save me a bit of time, no sore fingers and by doing it this way I can move the quilt through the machine much more freely......no pins or long thread basting to get caught up on.

Monday, July 16, 2012

Mystery Block

Many of you commented on the look of that final border on the quilt shown in my most recent post. It is a fairly simple block that really makes for an interesting border and one that would work in so many ways. I wish I could tell you where I first saw that block.....or even the name of it, but I can not. I can show you how I made it and give you measurements for different sizes you might want to make for your own quilts.

It is a pretty basic block. I will give you the example using the measurements for a finished 4" block.
Cut a print at 4.5" square, from contrast fabric, cut 2 pieces at 1.5"square and create one circle that will finish at 1 3/8" in diameter.
Mark a diagonal line from corner to corner on the wrong side of the 1.5"squares, next, place a square with the line visible, on one corner of the 4.5"piece and stitch directly on the drawn line, trim away the excess and fold up the fabric to complete one corner...repeat on the opposite side  (for a corner unit you will need to do this on 3 corners)
I positioned the circle a little bit above the center-line of the block (just be sure you do it the same for all of them or the discrepancy will be very noticeable) I made a small template from cardstock to make the placement easy and accurate
Hopefully the photos help you visualize the process.

To make a finished 6" block
begin with a 6.5"square, cut the 2 corner units at 2 1/4"  and your finished circle at 1 5/8" in diameter

For a finished 8"block
begin with a 8.5"square, cut the 2 corner units at 3"  and your finished circle at 2" in diameter

to form a row, stitch your blocks together (1/4"seam allowance, of course) and then add a strip of the same contrast fabric across the top, whatever width works for your project.
Edit:  Mystery solved! Dolores just emailed me so say that she came across the block, it is a pattern by Kim Diehl, I am told that it graces the cover of Kim's book  "Simple Traditions"
Thanks Dolores, it has been driving me nuts, I just knew I had seen it used somewhere as a border and thought it would be great for this medallion quilt.....and Thank you KIM!!!!

Copyright Jill Buckley