Saturday, October 27, 2012

Drum Roll please........

The winner of an original Quilt Rat doodle is....... Anne-MarieB 

She will get her choice of what she would like me to draw for her ........congrats Anne Marie, an email is on the way. 
I just can't put up a post without a photo, so I thought since Halloween is just around the corner I would do a new papercut.........you aren't bothered by spiders....are you?



Saturday, October 20, 2012

Blog-versary.......3 years and counting

I became a blogger 3 years ago. Like many of you, my blog is really just a place to track my progress, to be able to look back and see the evolution of my work. In the beginning, I did not even know how to upload a photo. It has been a terrific learning experience and along the way, I have met some fabulous people and have been presented with several exciting opportunities. I enjoy having this spot to share my "eureka" moments and am always delighted by your comments.

I know some of you have found me just recently, while others have been visiting right from the very start.

I think 3 years, needs to be celebrated, don't you?........perhaps a giveaway is in order?......the prize????.....well my doodles seem to be popular so how about if I offer to do one just for the winner?
To enter, leave me a comment telling me what you like best about visiting my little corner of the Net.

I'll choose the winner next weekend........if you win,
what would you have me draw????


Monday, October 15, 2012

Quilt Circles without Marking

I like the look of circles in quilting. When doing a pebble type background fill, random sizes look best, BUT if you want your circles to be the same size, and you don't want to measure and mark each one........here is what works for me.
I use these sticky dots, they come in several sizes. I just eyeball a line of them, stitch around each one, then peel them off and reposition them to another spot so that they can be used many times.





Thursday, October 4, 2012

a little behind

it seems that I have fallen a little (well, quite a lot actually) behind in keeping up with the Creative Prompt Project. Jaye over at artquiltmaker is still enthusiastically offering up prompt words each week as a way to boost our creative thinking. I thought perhaps I was due to post one

Word #175 is Needle. Check out this huge needle I have.......no idea what it is used for (sails maybe) it is marked England and is incredibly sharp.
 
looking at it beside some normal sized tools made me think that it might require a larger needle threader.

and where do we tend to store our sewing needles?.......... how about this pin cushion?



Monday, October 1, 2012

Printing on Fabric ......continued

Please note that the tests and instructions for printing on fabric are from 2012, technologies, printers, inks and other products used here may have changed so please know that your results may vary widely.


Once you have printed on fabric using your inkjet printer the pieces will need to be rinsed.  I left my printed pieces overnight before rinsing. I use a little bit of Retayne in my rinse water to help set the ink. Here is a look at a piece in the rinse bath......I wanted you to see that there is no ink floating about. 

For the photos that I printed in sections I wanted to be certain there would be no distortion, so I sewed them back together before rinsing

Here you see that hockey player image immersed in the rinse bath. That cloudiness you are seeing, is the soda ash dissolving.

I added some borders, note that after rinsing the colours have remained strong.


this small quilt is about 20 inches square, so it is a great candidate for pin basting with those little foam bits I talked about here

Some of you may recognize this image. Occasionally, I agree to do a presentation/trunk show and am not always able to do a slide show, I was looking for a way to show some pieces that I no longer own. I know it not the same as the "real" thing......but viewers will be able to get a sense of the original design.

I have printed a few different images so that I can make quick "replicas"


Tuesday, September 25, 2012

Printing on Fabric



It has been a little while since I last ran fabric through my printer, I have been wanting to try printing a photo in sections on fabric and stitching it back together. So come along and I'll show you what I did.

First, I made up a batch of my homemade Inkjet set solution, that will allow me "set" the printer ink into the fabric so they won't run or bleed. I have shown this before but, I wanted to prepare a good sized piece of fabric this time, so I tweaked my recipe just a wee bit. The recipe is very simple.

2 tablespoons of Alum   (the stuff used when making pickles)
2 tablespoons of Soda Ash  (the stuff fabric dyers use  NOT washing soda)
2 cups VERY hot water
I mixed this all together.....made certain everything was completely dissolved, added my dampened fabric (which was previously pre-washed) and let it soak for approximately 20 minutes, at which point I gently squeezed out the excess liquid and hung the fabric to dry. (Be sure to wear rubber gloves when handling the solution)
I prepared enough fabric to create 18 printable sheets.

How do you make printable fabric sheets, you ask?  just follow these steps.
Once your solution soaked fabric is thoroughly dry, you need to press it well with a dry iron (no steam!) The  fabric at this stage is susceptible to scorching, so be mindful of that too.
Cut fabric and freezer paper into pieces a bit larger than 8.5 x 11 so that you will be able to trim them perfectly.

Press a piece of freezer paper to the backside of each of your fabric pieces


trim to the size of copy paper....8.5 x 11


Next, to be certain each piece of fabric goes smoothly through my printer, I stitch each piece of prepared fabric to a sheet of cardstock using a zig zag stitch. take a close look at the photos below, leaving that little bit of cardstock at the edge ensures that the printer will grab it and feed it through perfectly each and every time (I ran 10 sheets through in this session and each one printed exactly as I wanted)
Caution! be absolutely certain that you have trimmed the threads as close as possible.....you do NOT want any loose threads that can get caught up in the printer.


here is a look at 4 sheets after they came out of the printer.


I removed the stitching by simply sliding the seam ripper along the edge, to take the fabric off of the cardstock and freezer paper ( I can reuse that cardstock many more times) and now I am ready for the next step...............ahhh...but that will be in another post.

For those who want to know what kind of printer I used, I currently have an inexpensive Canon Pixma iP2600 ink jet colour printer. 

Wednesday, September 19, 2012

Inspiration

Lately I have become quite fascinated with feathers, I have had some interesting visitors to my bird feeder this summer. Recently, this tiny little Red Breasted Nuthatch has been popping by. It is only 3 - 4 inches and moves very swiftly so you need to be quick to snag a photo.



 This pretty little bird was the inspiration for the doodle below.


Yesterday, I was quite surprised to find this looking back at me just outside my window...... It appears to be a Broad Winged Hawk.......this beauty was roughly 20 inches long (maybe bigger)
I took this photo through the window......he was only about 3 feet away and I swear he was posing for me!






Wednesday, September 12, 2012

Tentest Design wall

Sometimes you need something more substantial than a flannel design wall. Those are great for block placement, but what if you want to add embellishments?.....you can not easily audition beads, buttons or found objects in an upright position.  
I thought you would like to see what I use. At the lumber store, I purchased a sheet of "Tentest", I bought a 4'x8' sheet and asked them to cut it down to a more manageable 4'x6' size

close up of the cut end
This product is a fibrous board, also great for use as a bulletin board. It is sturdy, fairly lightweight and pins into very easily. I took an inexpensive bed-sheet and essentially made a large pillowcase out of it to slip right over the whole piece....I can use both sides if I want to.

4'x6' covered Tentest
 You can pin just about anything to this, so now, you can quickly see how the addition of  various embellishments will look......walk away, step back and assess before making a commitment.







Tuesday, September 4, 2012

Sun-Print & Thread

Do you recall the sun-print I made using feathers? here is what they look like now, with just a small bit of stitching added. I tried to maintain a light airy feel.






Tuesday, August 28, 2012

Centerfold

That's right, I can add "centerfold" to my list of accomplishments.......no need to cover your eyes, its not me, just my design  :-)


The Autumn issue of the Canadian Quilter is out, and for this one, I submitted a design/pattern for those who would like to try a bit of thread painting. My design allows the maker to really take full advantage of beautiful print fabrics and then, to simply enhance them with thread.


Marsha, the Editor, has once again, done an outstanding job! Don't forget, there is also a spot on the CQA web site (members only section) where members can access the PDF version of the pattern to send straight to their printers as well as an area to upload photos of their finished projects. In addition, there is now a CQA blog...even more ways for Canadian quilters to connect
Copyright Jill Buckley