Thursday, July 14, 2016

Making a Stencil with Window film

My most recent post talked about using technology in my process, using my iPad and an app called Concepts, I had created an image that I wanted to turn into a stencil that would allow me to print in a variety of ways.


First, let me show you some of what I did.......then I will show you the simple method I used to make a durable, re-usable stencil......or just skip ahead  :-)

Once I made my stencil, I got out my screen printing supplies. (they had been sitting unused for a very long time)


I flooded the screen with ink and then set it down on my stencil which allowed it (the stencil) to "stick" to the underside of the screen. Here is a sampling of the images I pulled. Several are on plain black cotton and the rest on a variety of hand dyed fabrics.


Now, you might say....why would you want a bunch of white prints like that?.....well, the answer is that I can go in now and add colour......a little or a lot.
this is an example of one of the white on black prints that I added some colour to using Tsukineko inks and Aloe gel.....subtle blues and greens


But one could go crazy and add some wild colour too........ this one below, was a "test" of a bunch of different things, paints, markers, inktense pencils, dye sticks and what ever else I got my hands on just to "see" what would happen.....the result is pretty jarring but it was a good way to learn what works and what doesn't while only ruining one print ( something like this could work well if you want a stained glass effect)


I also used the stencil ....as...well...a stencil.  I laid it on top of this commercial fabric and "stenciled" with Seta-Color fabric paint......after being heat set, it is nice and soft and perfect for the addition of hand stitches


As you can see I used this stencil in a variety of ways....and had to clean it several times. When I used the silk screen, I forgot to remove it before I went to rinse my screen so it got a real scrubbing. I was a bit concerned as this is how it looked after that initial cleaning


Yikes!.....but no worries, I placed it between some paper towels and left it to dry weighted with a heavy book ....it dried flat and I have continued using it with no problems.

Dry and ready to use again and again
as you can see.....I have used it many, many times and it is still holding up well.


Okay....so...Want to make your own stencils? unlike using freezer paper or cardboard (that are often only single use), this method gives you a stencil you can clean and reuse. The bonus is that you can make it pretty much any size you want.
Here is what you need.....your image (I just printed my design on regular printer paper), a sharp pair of small scissors (or craft knife if you prefer), an awl, and window film.....yup...window film, that clear, sticky plastic stuff that comes on a roll applied to windows for privacy, available at home improvement stores among other places.


cut 2 sheets of the window film, allow a couple of inches all around the image you will be cutting. You are going to be trapping the image between these 2 sheets


Take the 1st sheet and carefully peel back the release paper enough to place your image on the sticky side


then place the next sheet, sticky side to sticky side and slowly, carefully, peel the release paper away....(sorry I really could not do this and take photos at the same time....hopefully you get the idea.) the end result should be your image trapped between these two layers of clear window film. You want to take care that you have a smooth flat surface with no bubbles.  I also used a roller/brayer to make sure I had a very tight seal.


now comes the fun cutting part.....just like with my method of paper cutting.....I take the time to determine which areas to cut first, I poke some tiny holes with an awl to allow my scissors access


I generally cut the smaller more difficult areas first


and continue working my way through the entire design, bit by bit.


and there you have it......a flexible, durable, re-usable stencil. 


Even if you did not want to make prints.....this would be a great way to make quilting stencils that could be used with chalk, pencils, or Pounce pads to transfer the design.




5 comments:

Robbie said...

Great idea on the window film!!! Will have to book mark this for my fiber group in Florida next winter! Cool idea!!

Createology said...

Hello Jill. You always give me the WOW factor when I come and visit. Not only is your Dragonfly doodle beautiful it is amazing how you have created a very clever stencil that is usable many times over. I love your fabrics and colored Dragonflies. You are extremely skilled and talented and I love seeing all that you experiment and create. Embracing Creative Bliss...

Diane J. Evans said...

WOW! I just LOVE the one that looks like stained glass -- I don't think you "ruined" the sample at all. It's a great combination of so many mediums.

You continue to dazzle, my friend.

Diane

The Inside Stori said...

ABSOLUTELY brilliant. Thank you for your generosity by sharing this great technique with us!!

CharlotteP said...

That's a great idea, it does look like stained glass. I tried a similar thing when cutting pieces for 70 butterflies for a quilt (22 bits in each one...madness), drew the pieces on the computer and printed on paper, then laminated the paper and cut out using a scalpel. Still have the useable stencils but NO plans to make more!

Copyright Jill Buckley